HI-F
Product and applications
Cold-storage sandwich panel, with metal faces and rigid insulation core, for applications that require a high degree of insulation: food and agricultural industry, cold stores, laboratories, etc. Good fire performance, CLASS 1 certified by <FM Approvals > (HI-PIRM F panel). The range of HI-F panels is available with two insulating cores: PIR (HI-PIR F) and PIRM (HI-PIRM F). Available in various steel thicknesses, with coatings suitable for contact with foodstuffs, and three finishing possibilities: standard lined profile, flat and plank. High mechanical performance certified by laboratory tests.
Downloads
Data sheet- HI-F
BIM – HI-F-FJ
BIM – HI-F – FS
N mark certificate – HI-PIRM-F
N mark certificate – HI-PIR-F
Technical Sheet – Inserts – HI-F
Assembly Sheet – HI-F
DWG drawing – HI-F (FJ joint)
DWG drawing – HI-F (FS joint)
PDF Plan – HI-PIR(M) F (FS)
Fire performance
Reaction to fire according to FM APPROVALS standards (only HI-PIRM F panel) : FM 4880 Class 1* Fire resistance of building panels or interior finishing materials. FM 4881 Class 1* Exterior wall systems. Test programme assess the fire performance of facades or walls and interior ceilings with HI-PIRM F panels, of any height, for the most demanding fire protection requirements in fire protection.
Fire reaction classification: EUROCLASS B-s1,d0
EI 60 fire resistance: with HI-PIR F panels in accordance with EN 13501-2:2016 for panels thicker than 200mm. Tested under the name “HI-PIR F 200mm (EI)”. Consult assembly conditions.
Technical details
Useful with: 1,150 mm (1,120 mm, check availability)
Manufacturing length: Standard 2.0 to 13.5 m | Special 13.5 to 18.0 m (special transport)
Type of joint: FJ | FS
Declared thermal conductivity: 0.022 W/mK (considering an aged core)
Total thickness (A) 60 | 80 | 100 | 125 | 150 | 175 | 200 | 230 (mm)
Advantages
Leak-tightness and joint types
The HI-F panel is available with two types of joints, both with double tongue and groove and flexible polyethylene jointwhich guarantees the best water tightness with a simple and fast assembly.
The FJ joint is certified as not requiring additional silicon sealing (under the permeability parameters indicated). Water-tightness accredited in laboratory tests (according to the EN 14509:2013, EN 12114:2000 y EN 12865:2002 standards).
Permeability to air: 0,00 m3/h· m2 a 50 Pa. Values certified by external laboratory according to Standard EN 12114:2000.
Permeability to water: CLASS A* (joints permeable to water at pressures higher than 1,800 Pa). Best classification according to EN 12865:2002, for demanding applications with heavy rain and strong winds.
(*) Applies to thickness equal to or greater than 80mm.
The FS joint has been designed with the aim of adding an additional externalsealing seam which can be applied once the panel installation is completed. The FS joint also allows the application of butyl seal at its interior during the assembly stage.
